IOTA CORPORATION LTD
Silicone material belongs to a large category of rubber, which is mainly composed of several categories such as silicone rubber, white carbon black, silicone oil, silane coupling, etc. Each component ......
2025-01-08Compared to the other two options, self-adhesive liquid silicone rubber does not require the use of a primer. Compared with the mixed rubber system of disulfide vulcanization, the environmental advant......
2025-01-081.Preparation materials: Ensure that you have the IOTA LSR 3100 series A and B silicone components, as well as the required molds on hand. 2.Mixed silicone gel: Mix the A and B components of silico......
2025-01-07In today's era of pursuing both health and pleasure, a stress relieving toy that is both safe and fun - Pinch Music, is gradually gaining popularity among the public. The key material for making this ......
2025-01-07Among them, additive liquid silicone rubber is a type of product with a large application of vinyl silicone oil. It is required to completely exclude hydroxyl terminated polymers to avoid the thermal ......
2025-01-032. Synthetic injection molded silicone rubber. Compared with branched vinyl silicone oil, the molecule has no dangling segments. 5. Suitable for two-stage vulcanization free products, medical silico......
2025-01-03Flame retardants are additives that can prevent plastic from igniting or suppress flame propagation. According to its usage method, it can be divided into two categories: additive type and reactive ty......
2025-01-02Burning is a natural phenomenon in the objective world, such as lightning strikes that can trigger forest fires. Burning is also a human phenomenon required in human life or production. In order for c......
2025-01-02(1) Silicone rubber is a highly saturated raw rubber that cannot be vulcanized with sulfur and is typically vulcanized using heat. Hot vulcanization uses organic peroxides as vulcanizing agents, so th......
2024-12-312. Low surface energy, excellent hydrophobicity and hydrophobicity mobility; 4. Good high temperature resistance and can be used continuously at 180-200 ℃. Although the strength of silicone rubber at......
2024-12-31The main characteristics of transfer printing are as follows: 1. Low cost The cost per unit is low, and the labor cost is low because most of the processes are completed by machining. 2. Wide ran......
2024-12-30Pad printing is the process of etching the desired pattern onto a steel plate (or copper, thermoplastic) using film, and then using a curved pad head made of silicone rubber material. The ink on the p......
2024-12-30When the adhesive head is too hard, incomplete printing patterns may occur because the pattern is too small and the adhesive head is too hard. The glue head itself does not adsorb the pattern ink on t......
2024-12-26Pad printing is the process of etching the desired pattern onto a steel plate (or copper, thermoplastic) using film, and then using a curved pad head made of silicone rubber material. The ink on the p......
2024-12-261. Room temperature curing: curing temperature range is 20-30 ℃ 2. Medium temperature curing: The curing temperature range is 32.2-98.9 ℃ 3. Gel: Semi solid system composed of aggregate network ......
2024-12-25
