IOTA CORPORATION LTD
Vinyl silicone oil is used as a base material for producing high-temperature vulcanized silicone rubber (HTV), and is mixed with crosslinking agents, reinforcing agents, coloring agents, structural c......
2024-12-06......
2024-12-061. Used as a base material for producing high-temperature vulcanized silicone rubber (HTV), mixed with crosslinking agents, reinforcing agents, coloring agents, structural control agents, anti-aging a......
2024-12-04(Me) is replaced by vinyl (Vi) to form a reactive polydimethylsiloxane. It is generally made from octamethylcyclotetrasiloxane, tetramethyltetravinylcyclotetrasiloxane as raw materials, tetramethyldiv......
2024-12-04Among them, additive liquid silicone rubber is a type of product with a large application of vinyl silicone oil. It is required to completely exclude hydroxyl terminated polymers to avoid the thermal......
2024-12-031. Synthesize high-temperature vulcanized silicone rubber (HTV). 2. Synthetic injection molded silicone rubber. 3. Compared with branched vinyl silicone oil, the molecule has no dangling segment......
2024-12-032.Mixed silicone gel: Mix the A and B components of silicone gel evenly in a clean, anhydrous container according to the specified ratio (usually 1:1, but please refer to the product manual). Note tha......
2024-12-03The IOTA LSR 3100 series is a high-quality two-component platinum catalyzed silicone elastomer. When components A and B are cleverly mixed and cured, it transforms into an extremely soft elastic mate......
2024-12-03It can be used for the production of clothing trademarks, as well as for pressure cloth, pressure leather, metal paper, plastic, glass, leather and other trademarks, and anti slip tape coatings. It c......
2024-11-29......
2024-11-291. Mixing Mix A and B evenly. By weight ratio A: B=10: 1. Allocate to the mixing container and mix thoroughly. For optimal results, it is recommended to perform vacuum degassing to help eliminate......
2024-11-29Usage method 2) Curing conditions: Coated liquid silicone rubber will quickly cure in high temperature environments. The curing time depends on the thickness and the curing temperature used. Contact......
2024-11-29......
2024-11-27......
2024-11-271. The viscosity is relatively low, only between 20-100pas, while the viscosity of general LIMS is between 400-2000pas 3. Higher requirements for equipment cleaning High transparency liquid silicone......
2024-11-26
