......
2024-11-26......
2024-11-26About ......
2024-11-21Flame retardant coated silicone rubber, as a new type of high-performance material, has been widely used in multiple industries, especially in situations that require fire prevention and high temperat......
2024-11-21Very soft silicone (0 ° A): has high elongation and low tensile strength, with low tear strength and high elongation of mold silicone. Medium hardness silicone (20-30 ° A): harder than soft silic......
2024-11-20About injection liquid silicone rubber,please check the details: H......
2024-11-20About injection liquid silicone rubber,please check the details: H......
2024-11-19The addition silicone gel is colorless or yellowish transparent oily liquid before vulcanization, and becomes soft and transparent silicone gel after vulcanization. Additive formed liquid silicone rub......
2024-11-192. Medium temperature curing: The curing temperature range is 32.2-98.9 ℃ 4. Applicable period: also known as usable time or service life. The usable time or applicable period refers to the time fr......
2024-11-19The two-component addition molding potting adhesive can be divided into elastic silicone gel and silicone rubber. The former has lower strength, while the latter has higher strength. Their vulcanizati......
2024-11-19This type of mold adhesive has a wide range of applications, especially in the food industry. Low hardness mold adhesive can be used for the production of food grade molds such as chocolate infusion ......
2024-11-141. Surface treatment: The surface of the mold or material that needs to be sealed for the first time can be cleaned with white electric oil or detergent water, and then air dried. 3. Defoaming: P......
2024-11-141. Before using the new mold, the surface or the surface of the material that needs to be sealed can be cleaned with white electric oil or 3% detergent water, and then air dried; 3. Defoaming: Pour......
2024-11-13Kneading liquid silicone is a food grade two-component platinum catalyzed silicone elastomer designed specifically for making stress relieving toys such as Kneading. After mixing its AB components, it......
2024-11-13The location of the injection point is also worth considering, as the shrinkage rate in the direction of the adhesive flow is usually greater than that in the direction perpendicular to the adhesive ......
2024-11-12