IOTA CORPORATION LTD
The main characteristics of transfer printing are as follows: 1. Low cost The cost per unit is low, and the labor cost is low because most of the processes are completed by machining. 2. Wide ran......
2024-12-30Pad printing is the process of etching the desired pattern onto a steel plate (or copper, thermoplastic) using film, and then using a curved pad head made of silicone rubber material. The ink on the p......
2024-12-30When the adhesive head is too hard, incomplete printing patterns may occur because the pattern is too small and the adhesive head is too hard. The glue head itself does not adsorb the pattern ink on t......
2024-12-26Pad printing is the process of etching the desired pattern onto a steel plate (or copper, thermoplastic) using film, and then using a curved pad head made of silicone rubber material. The ink on the p......
2024-12-261. Room temperature curing: curing temperature range is 20-30 β 2. Medium temperature curing: The curing temperature range is 32.2-98.9 β 3. Gel: Semi solid system composed of aggregate network ......
2024-12-25In the electronic and electrical industry, silicone rubber is widely used in insulation layers of wires and cables, sealing components of electronic components, etc. due to its good insulation and hig......
2024-12-25Condensation type room temperature vulcanized silicone rubber is characterized by the condensation reaction between silicon hydroxyl groups and other active substances, which can crosslink into elast......
2024-12-24Silicone rubber is the largest and most widely used category of organic silicon products. After vulcanization, silicone rubber has excellent characteristics such as high and low temperature resistance......
2024-12-241. Structural control agent Simplified process: Low viscosity hydroxyl silicone oil can replace diphenylsilanol, simplify the production process of silicone rubber, and improve process performance. ......
2024-12-23Hydroxysilicone oil is a linear polydimethylsiloxane with hydroxyl end groups, which is an oily liquid. It has the characteristics of methyl silicone oil, such as colorless, transparent, odorless, and......
2024-12-23Due to the overall use of silicon hydride addition curing method, there is no small molecule release during the production process, and no solvent is required to coordinate production, which is in li......
2024-12-20Operation method ......
2024-12-20Among them, additive liquid silicone rubber is a type of product with a large application of vinyl silicone oil. It is required to completely exclude hydroxyl terminated polymers to avoid the thermal ......
2024-12-192.Synthetic injection molded silicone rubber. 4.Easy to react with various organic materials such as polyurethane and acrylic acid. ......
2024-12-19......
2024-12-18
