IOTA CORPORATION LTD
Rubber mold is one of the simplest methods in the rapid mold, generally using silicone to reproduce the RP prototype, but the life is very short, only about 10-30 pieces! It has good elasticity and re......
2023-06-21Silicone rubber as a medical material after decades of clinical application, has been recognized by the medical community, more and more widely used, many large companies to medical silicone rubber as......
2023-06-21First, cold shrink cable accessories Cold-shrink cable accessories are made use of the high elasticity of silicone rubber materials, the high temperature vulcanized silicone rubber is vulcanized by i......
2023-06-21The gentleness of surfactants on human skin, eyes and hair, especially on skin and eyes, is a difficult concept to define, and so far there is still no uniform standard. The irritability or sensitizat......
2023-06-15High-temperature mold silica gel is also A kind of mold, is an environmentally friendly new material, plus formed two-component silica gel, the ratio is 1:1 (A: B). What are the performance characteri......
2023-06-15Silicone rubber use: can be used for molding high voltage edge and other electronic components; It is used to produce TV sets, computers, copiers, etc., and is also used as molding gaskets requiring w......
2023-06-15Silicone rubber material is an excellent insulating rubber material, which has the characteristics of ozone resistance and high temperature resistance. However, the biggest disadvantage of this materi......
2023-06-15High temperature silicone material is one of the indispensable important materials in automobile manufacturing, which can not only optimize the automobile manufacturing process, but also improve the p......
2023-06-15First, methyl silicone rubber Dimethylsilicone rubber is the first kind of silicone rubber put into commercial production, which can maintain good elasticity in the range of -60 ~ 200 ° C, good aging......
2023-06-15Thermal and weather-resistant silicone coating for solar thermal power generation structures: solar thermal structures should be exposed to strong light for a long time and work in a high temperature ......
2023-06-15Solar thermal power generation system of high temperature heat transfer medium silicone oil: in order to improve the efficiency of power generation, solar thermal power generation system of heat trans......
2023-06-15The structure of the thermosetting liquid silicone rubber (LSR) injection mold is generally similar to that of the thermoplastic compound, but there are also many significant differences. For example,......
2023-06-094. tear strength Resistance to the expansion of a cut or score when applied to a notched sample. Even after being cut and placed under extremely high torsional stress, the hot sulfurized solid silico......
2023-06-091. viscosity The volumetric characteristics of liquid, quasi-liquid or quasi-solid substances against flow, that is, the internal friction or flow resistance between molecules when they flow under th......
2023-06-09The structure of the thermosetting liquid silicone rubber (LSR) injection mold is generally similar to that of the thermoplastic compound, but there are also many significant differences. For example,......
2023-06-07
