Use of medical liquid silicone rubber Medical liquid silica gel is also known as two-component room temperature vulcanized addition silica gel. Both components A and B of silica gel are flowable li......
2022-10-12Now people have higher and higher requirements for living health. From skin care equipment to small appliances used in daily life, they are required to be healthy, environmentally friendly, harmless a......
2022-10-12With the further improvement of industrial level, more and more people will use a large number of silicone rubber products in their lives. The two most common silicone rubber products can be divided i......
2022-10-12Silica gel is more resistant to high temperature, which is between 200~300 ℃. High temperature resistant silica gel is generally divided into high temperature resistant solid silica gel and high temp......
2022-10-12It is very challenging to open the mold for rubber molding, especially liquid silicon (LSR) injection. Many people think that the technical difficulty of rubber molding is low. The opposite is true. I......
2022-10-10Silicone rubber can be processed with ordinary rubber processing equipment, but attention should be paid to: ① Keep the processing clean, and do not mix with other rubber, oil or impurities, otherwise......
2022-10-10Addition silicone rubber is usually composed of vinyl terminated polyphenylsiloxane, low molecular weight silicone oil, silicone resin, platinum catalyst, etc. According to different application requi......
2022-10-10Silica gel mold is made of silica gel as raw material. No matter what kind of silica gel mold is, it has a little shrinkage. The degree of exponential shrinkage is different. Shrinkage has little impa......
2022-10-101. Chemical structure of white carbon black 95~99% of white carbon black is SiO2. X-ray diffraction confirms that the structure of white carbon black is different due to different preparation metho......
2022-09-29There are two methods to prepare white carbon black, namely calcination method and precipitation method. The white carbon black prepared by calcination method is also called gas phase white carbon ......
2022-09-29As early as 3000 years ago, people mastered the technology of burning smoke to make ink, but the production technology of carbon black has been developing slowly for a long time. It was not until 1872......
2022-09-29Different types of liquid silica gel will be cured into solid silica gel with different hardness and different properties after curing. Its main uses can be divided into the following categories: 0......
2022-09-26Silicone Sheath Advantages: non-toxic to the human body, good buffering performance, high abrasion resistance, oil resistance, water resistance, good flexibility, comprehensive protect......
2022-09-26Dimethicone oil, also known as polydimethylsiloxane, is a kind of hydrophobic silicone material, colorless or light yellow liquid, odorless, high transparency, heat resistance, cold resistance, small ......
2022-09-21Silicone mold is made of silicone as raw material. No matter what kind of silicone mold, there will be a little shrinkage, and the degree of index shrinkage is different. The shrinkage has little effe......
2022-09-21