Summarize The vinyl silicone oil produced by the company has the advantages of low volatile content, good fluidity, fast foaming, and higher proportion of filling powder under the same viscosity. V......
2023-06-29A. Mixing process Mixing time is not enough, discharge temperature is too high or too low; Acidic and alkaline compounds are added simultaneously (e.g. stearic acid and ESEN are added together with z......
2023-06-29First, the cause of burning and treatment of mixed rubber 1. Mismatches Such as vulcanizing agent, accelerator dosage is too much; 2. Improper rubber mixing operation Such as the temperature o......
2023-06-29After rubber mixing, various auxiliaries have not been dispersed evenly, and at the same time, the stress generated by the rubber macromolecular chain is not completely eliminated by the cutting, tear......
2023-06-29In summary, because organic silica gel has many excellent physical and chemical properties, so that it can be used in many occasions and environments, will play an important role in more fields. In th......
2023-06-29As we all know, the service life of buildings is generally at least 50 years, so the materials required to be used must also have a long service life. Silicone sealant has been widely used in the fiel......
2023-06-29Raw rubber is short for methyl vinyl silicone rubber, is made of dimethylsiloxane and a small amount of vinyl siloxane copolymerization, vinyl content is generally 0.04%~0.3% (mole fraction), the appe......
2023-06-291. Mold silicone Liquid silica gel is a new type of mold material. Compared with steel mold, silicone gel has great advantages in production efficiency and production cost. Today, mold silica gel has......
2023-06-21As for the temperature resistance of high temperature ceramic coating, the temperature must be higher than 280 ° C, the coating is stable, acid and alkali resistance to thermal shock, and the applicat......
2023-06-21Condensed silicone rubber and molded silicone rubber have many differences in product packaging form, use mode and performance (Figure 2), such as curing speed, body strength, adhesion, etc., but each......
2023-06-21Rubber mold is one of the simplest methods in the rapid mold, generally using silicone to reproduce the RP prototype, but the life is very short, only about 10-30 pieces! It has good elasticity and re......
2023-06-21Silicone rubber as a medical material after decades of clinical application, has been recognized by the medical community, more and more widely used, many large companies to medical silicone rubber as......
2023-06-21First, cold shrink cable accessories Cold-shrink cable accessories are made use of the high elasticity of silicone rubber materials, the high temperature vulcanized silicone rubber is vulcanized by i......
2023-06-21The gentleness of surfactants on human skin, eyes and hair, especially on skin and eyes, is a difficult concept to define, and so far there is still no uniform standard. The irritability or sensitizat......
2023-06-15High-temperature mold silica gel is also A kind of mold, is an environmentally friendly new material, plus formed two-component silica gel, the ratio is 1:1 (A: B). What are the performance characteri......
2023-06-15