IOTA CORPORATION LTD
Many times, we talk about anti-cratering and leveling agents. In fact, anti-cratering additives and leveling agents are two different additives, but many times, some leveling agents (especially ......
2019-12-05Leveling agent (paint leveling agent, ink leveling agent) IOTA3000 is a silicone surface additive, which reduces the surface tension of the coating to improve the wettability of the substrate. Increas......
2019-12-05The role of leveling agents There are many types of leveling agents. Different types of leveling agents are used in different coatings. The most commonly used leveling agent in oily coatings is acryl......
2019-12-051.Polyurethane potting compound The temperature requirement is not more than 100 degrees Celsius. There are many bubbles after encapsulation. The encapsulation conditions are under vacuum, and the ......
2019-12-041. It can be cured at room temperature without heating, and the curing process is very simple, the operation is very simple, no curing equipment is needed, energy saving and cost 2. Adhesives with ......
2019-12-04Room temperature curing epoxy adhesive is a kind of adhesive with a series of advantages such as time saving, labor saving, labor saving, energy saving, easy to use, etc. It is applied to all walks of......
2019-12-04Cement-based penetrating crystalline waterproof coating Cement-based infiltration crystalline waterproof coating is a new type of rigid waterproof material based on cement, sand, etc., and mixed wi......
2019-12-04Product introduction —— Non-curing rubber asphalt waterproof coating is a plastic paste made of rubber powder, modified asphalt and special additives. It has a long-term non-curing waterproof material......
2019-12-04Product introduction —— Spraying fast-setting polymer rubber asphalt waterproof coating is a water-emulsion spray coating composed of rubber modified asphalt emulsion and coagulant. It is sprayed by s......
2019-12-04product description: Silicone nano-permeable waterproofing agent TG-0122 is a nano-material waterproofing agent, non-fluorine-free, non-toxic, odorless, non-combustible, non-explosive, non-volatile......
2019-12-03product description Nano organic silicon waterproof agent is a new type of nano waterproof material. Compared with traditional organic silicon, it can be sprayed, painted, and brushed directly on c......
2019-12-03Precautions 1. Store this product in a sealed and closed light. After each use, the packaging should be sealed to avoid failure, and it should be used up within 72 hours after opening. 2. Before......
2019-12-031. Clean the surface to be treated before use, and remove the base area water, dust and other attachments to be treated. For maximum penetration into the substrate, apply it on a dry surface. 2. Be......
2019-12-03There are seven types: brush (using a brush), coating (using a sponge), rubbing (using a cloth), spraying (using a low-pressure spray gun), soaking (using a soaking tank), roller coating (using a roll......
2019-12-03What is hydrophobic Hydrophobicity is the manifestation of the hydrophobic effect on the surface of the material. The following figure shows the force of a liquid on a solid su......
2019-12-03
