IOTA CORPORATION LTD
Analysis of the application of organic silicone adhesive in photovoltaic modules Solar photovoltaic power generation is currently the most economical, cleanest, and most environmentally-friendly su......
2019-12-06The main chain of silicone rubber products is very pliable, and its intermolecular force is much weaker than that of hydrocarbons. Therefore, it has lower viscosity than hydrocarbons of the same molec......
2019-12-06The basic structural unit of an organic silica gel product is composed of silicon-oxygen chains, and the side chain is connected to various other organic groups through silicon atoms. Therefore, the s......
2019-12-06After the coating is applied, there will be a process of flowing and drying to form a film. Finally, a flat and uniform coating film is gradually formed. However, during the leveling and film formatio......
2019-12-05Leveling agent The English professional name of leveling agent is Leveling agent, which is a commonly used coating additive, which can promote the coating to form a smooth, smooth and uniform coati......
2019-12-05Many times, we talk about anti-cratering and leveling agents. In fact, anti-cratering additives and leveling agents are two different additives, but many times, some leveling agents (especially ......
2019-12-05Leveling agent (paint leveling agent, ink leveling agent) IOTA3000 is a silicone surface additive, which reduces the surface tension of the coating to improve the wettability of the substrate. Increas......
2019-12-05The role of leveling agents There are many types of leveling agents. Different types of leveling agents are used in different coatings. The most commonly used leveling agent in oily coatings is acryl......
2019-12-051.Polyurethane potting compound The temperature requirement is not more than 100 degrees Celsius. There are many bubbles after encapsulation. The encapsulation conditions are under vacuum, and the ......
2019-12-041. It can be cured at room temperature without heating, and the curing process is very simple, the operation is very simple, no curing equipment is needed, energy saving and cost 2. Adhesives with ......
2019-12-04Room temperature curing epoxy adhesive is a kind of adhesive with a series of advantages such as time saving, labor saving, labor saving, energy saving, easy to use, etc. It is applied to all walks of......
2019-12-04Cement-based penetrating crystalline waterproof coating Cement-based infiltration crystalline waterproof coating is a new type of rigid waterproof material based on cement, sand, etc., and mixed wi......
2019-12-04Product introduction —— Non-curing rubber asphalt waterproof coating is a plastic paste made of rubber powder, modified asphalt and special additives. It has a long-term non-curing waterproof material......
2019-12-04Product introduction —— Spraying fast-setting polymer rubber asphalt waterproof coating is a water-emulsion spray coating composed of rubber modified asphalt emulsion and coagulant. It is sprayed by s......
2019-12-04product description: Silicone nano-permeable waterproofing agent TG-0122 is a nano-material waterproofing agent, non-fluorine-free, non-toxic, odorless, non-combustible, non-explosive, non-volatile......
2019-12-03
