Nano organic silicon waterproof agent
Hits: 699
img
product description
Nano organic silicon waterproof agent is a new type of nano waterproof material. Compared with traditional organic silicon, it can be sprayed, painted, and brushed directly on concrete, stone, brick and various silicate products and walls to form a transparent waterproof layer to achieve the surface waterproof effect, which maintains the original structure of the building. The appearance also achieves the effects of waterproof seepage, long moss, salt frost, mildew resistance, and pollution prevention, which improves the weather resistance, acid rain resistance, infiltration corrosion and carbonization resistance, and extends the life of the wall and products; and can be mixed with cement Synthetic hydrophobic mortar, used to make waterproof cement products and waterproof cement plaster layers.
Features
◆ Environmental protection, colorless, non-toxic, safe to use and easy to construct;
◆ Good waterproof performance, impermeability, water resistance and corrosion resistance;
◆ Can be mixed and sprayed to meet the needs of different users.
Scope of application
Applicable to the surface of buildings (especially brick walls, clear water brick walls, concrete blocks, split bricks, Taishan brick walls; lime, cement stucco), (grain) warehouses, houses, archives, libraries, etc ; Used on the joints of tiles and mosaics to prevent the tiles and mosaics from peeling off. Used on natural monuments and other monuments, it can prevent the growth of moss and keep the surface clean.
Construction steps
Nano silicone waterproofing agent is different from strong silicone waterproofing agent and can be used directly without water.
Spray or brush
In the case of rough surfaces such as concrete, cement mortar, and concrete prefabricated structures, it is better to spray. Where the surface is smooth, such as stones, marble, and granite, it can be applied by brush.
Before use, carefully clean the base surface, clean up the floating dust and moss, and seal and repair cracks and holes in advance.
When using, apply the silicone waterproofing agent with a clean agricultural sprayer or row of brushes on the dry base surface (wall surface, etc.) three times in a row and horizontally, without interruption in the middle. Spray 3-5m per kg of wall surface. 24 hours after construction, it shall not be attacked by rainwater. Construction shall be stopped below 4 ° C, and the base surface must be dry during construction. It has a hydrophobic effect at room temperature for 24 hours. The effect is better after one week, and the curing time is longer in winter.
2. Add cement mortar
Clean the base surface, clean the oil, floating ash, remove the peeling layer, etc., and seal the cracks with flexible materials.
Technical performance index: JC / T902-2002
Transportation and storage
◆ The product is non-flammable and explosive material and can be transported as general cargo. Protect against freezing, rain, exposure, crushing, and collision during transportation, and keep the packaging intact.
◆ This agent must not come into contact with more active metals such as zinc, aluminum and tin during transportation and use. It should not be stored in ferrous metal containers, so as to avoid chemical reactions and product deterioration and container corrosion.
◆ Storage period: 12 months