Usage method
1. Before using the new mold, the surface or the surface of the material that needs to be sealed can be cleaned with white electric oil or 3% detergent water, and then air dried;
2. Mix AB components evenly in a weight ratio of AB=1:1, which can be weighed and mixed. Alternatively, our AB automatic glue filling machine can be used to improve production efficiency. After mixing, defoaming can be used for pouring. If DIY, users only need to mix evenly in one direction according to the proportion to pour the mold;
3. Defoaming: Pour the AB glue into stainless steel buckets with filter screens, and send them together with the buckets into a vacuum box for vacuum defoaming. The defoaming process takes about 10-30 minutes, or it can be manually mixed and sent to a defoamer for 2-6 minutes;
4. When demolding and taking out the product, it can be done in 3-5% detergent water. The mold does not need to be cleaned again and can be reused after drying;
5. If it is necessary to add color paste for color matching, it is recommended to use an electric mixing tool to thoroughly mix it with adhesive A. If manual color matching is required, the color paste can be placed on the wall of the adhesive cup and slowly mixed and ground with the adhesive to ensure that the color paste is fully compatible with the adhesive;
6. Curing conditions: Adjust according to the mold and application scenario. Generally, the curing time at room temperature is three times the operating time, which means that a one hour operation can completely remove the film in three hours
About Kneading liquid silicone rubber,please check the details:
Food Grade Toy Kneading Liquid Silicone Rubber IOTA LSR 3100 Series