IOTA CORPORATION LTD
How to foam and form liquid silicone gel? We call the formed liquid silicone gel foam silicone gel. Foam silicone gel is divided into open cell and closed cell types. Open cell is mainly used for fill......
2024-07-29Non toxic and harmless: There are very few harmful substances released during the production process, and the finished product is harmless to human health and the environment, meeting environmental ......
2024-07-26On the one hand, by optimizing formula design and reducing the use of harmful substances, such as using environmentally friendly vulcanizing agents, accelerators, and other additives, pollution emissi......
2024-07-26High temperature performance is relatively stable The performance is also good at low temperatures Very good weather resistance Excellent electrical performance Good physical and mechanical proper......
2024-07-251. Increase the dosage of hardener 2. Increase the curing temperature 3. Increase pressure 4. Use accelerators In summary, the shortening of the solidification time of liquid silicone gel for cond......
2024-07-25......
2024-07-24In the research and development process of silicone sealant, environmental factors were fully considered, and low VOC (volatile organic compound) raw materials and production processes were used to......
2024-07-24......
2024-07-22Organic silicon compounds themselves have good insulation properties, and the addition of fillers can affect the molecular chain, resulting in a decrease in the electrical resistivity of vulcanized si......
2024-07-22Silicone rubber not only has excellent high and low temperature resistance, but also has excellent electrical insulation, weather resistance, ozone resistance, breathability, high transparency, as wel......
2024-07-20The processing technology of silicone rubber is also becoming increasingly advanced, including various molding methods such as compression molding, rolling, extrusion, etc. Especially with the emergen......
2024-07-20The two-component addition molding potting adhesive can be divided into elastic silicone gel and silicone rubber. The former has lower strength, while the latter has higher strength. Their vulcanizati......
2024-07-18The liquid silicone rubber injection molding method, which started in the 1970s, gradually became popular. Nowadays, as a molding method for silicone rubber, it has been recognized. Firstly, the commo......
2024-07-18In the field of building sealing and waterproofing materials, when choosing high hydrogen silicone oil, special attention should be paid to its waterproof, moisture-proof, UV resistant, heat-resistant......
2024-07-17Hydrogen containing silicone oil can be used in various fields, such as personal care, coatings, adhesives, electromechanical industry, anti fouling of building ceramics, hydrophobic treatment of ston......
2024-07-17
