Introduction of foamed silicone
Hits: 61
img
Introduction of foamed silicone:
Foamed silicone rubber and addition-type liquid foamed rubber are composed of two-component heating and vulcanized silicone rubber. The color is white paste-like liquid. After vulcanization, it becomes a soft elastomer material. Soft and light, with good hand feel and high foaming ratio, it is a high-quality material that is widely used in the production of silicone chest pads, shoulder pads, silicone foam sealing strips, and shock-resistant silicone foam boards.
Application fields of foamed silicone:
Foamed silicone rubber and addition-type liquid foamed silicone rubber are mainly used to make flexible silicone rubber products such as silicone chest pads, shoulder pads, silicone foam boards, and non-slip pads. It is mainly used to produce silicone foam seals, silicone foam coils, shock-resistant silicone foam plates, copier transfer roller sponge tubes, silicone foam insulation tubes, etc. The products are mainly used as shock-absorbing buffer accessories. It can also be used for filling of products such as bags.
Performance characteristics of foamed silicone:
1. It has excellent high and low temperature resistance, weather resistance, chemical stability and excellent biological inertness
2. Food grade, non-toxic and tasteless
3. Good fluidity, easy to pour; can be cured at room temperature, easy to operate
4. Uniform foaming and good stability
Instructions for the use of foamed silicone:
Mix components A and B at a ratio of 1:1, stir for 2-3 minutes, and then cure at room temperature.
1. Stir the raw materials sufficiently before use to prevent uneven distribution of some components due to storage.
2. Mix the liquid foamed silicone rubber in a ratio of 1:1, and stir for 2-3 minutes to ensure that the rubber is mixed evenly.
3. The mixed product is evacuated and used quickly to prevent the production work from being affected by agglomeration.
4. It is recommended that the mixing ratio of components A and B of liquid foamed silicone rubber is 1:1.
5. It is necessary to clean all tools, containers and other items that are in contact with the liquid foamed silicone rubber compound, and avoid contact with phosphorus (P), nitrogen (N), sulfur (S) compounds and metal organics, otherwise the product is easy to produce The catalyst fails and the reaction is not sulfurized.