High temperature resistant adhesives have the advantages of heat resistance and heat aging properties, especially when there is no change in performance at high temperatures, and they can maintain good mechanical properties and waterproof and moisture-proof properties. It has good resistance to chemical media and atmospheric aging, mildew resistance, and fatigue resistance. It will not change performance or embrittlement under alternating cold and hot environments.

Features of high temperature resistant adhesives:

The high temperature resistant adhesive has the characteristics of good adhesion, can be dried at low temperature, and will not crack or bubble after curing. The best temperature resistance can reach 1200 degrees, and even higher temperatures can be reached in a short time of construction. The coating thickness can be changed arbitrarily according to the performance of the product. It can be applied in multiple layers, or after one layer is cured, it can be applied for the second and third time.

Which industrial fields can it be used in:

1. The high temperature resistant adhesive can be used on the structural parts of the Mach number supersonic aircraft above 120 degrees.
2. It can be used in the manufacturing of large engine blocks and nuclear power plants with an ambient temperature of 180 degrees to 200 degrees.
3. The friction lining and brake band of the automobile clutch need to use this kind of adhesive for bonding.
4. Spacecraft parts, armored vehicle seals and tanks all need high-temperature adhesives, but because these fields have higher requirements for adhesives, only high-quality and good-quality can meet this requirement.

Noted:

High temperature resistant adhesives need to be thoroughly cured and dried before they can achieve the effect of impact before they can be used at high temperatures. If it is used in a high-temperature environment without being completely cured, it is prone to degumming and melting. During the construction, it should be noted that the construction surface must be clean and free of dust and moisture. In this way, the required bonding surface can achieve the effect of complete spreading and complete bonding.