Precautions for the use of silicone oil antifoam
Hits: 396
img
1. Because of its poor dispersibility, it needs to be fully stirred before formal use or sampling, so as to help it disperse better and prevent the effect of defoaming and antifoaming.
2. The effect of silicone oil defoamer at the initial concentration is the best. Once it is diluted, the diluted defoamer should be used up as soon as possible, otherwise the diluent may lose its effect slowly. Remind everyone to dilute appropriately and do not over dilute, otherwise it is easy to cause waste.
3. The application of defoamer may reduce the effectiveness, and there may be stratification phenomenon. When diluting, attention should be paid to mixing well, and thickening agent should be added to enhance its stability and ensure the use effect.
4. Avoid high and low temperature storage, pay attention to frost phenomenon in low temperature environment, high temperature should not exceed 40 degrees Celsius, in these two cases, it is very easy to damage the use effect of defoamer, serious will directly fail.
5. In use, if it is not stable and calm environment, such as violent vibration and stirring, the use effect of defoamer will decline, so try to use silicone oil defoamer in a relatively stable environment.
6. When the defoamer is unstable, thickening agent can be added to enhance its stability.
The above is the use of silicone oil defoamer need to pay attention to some of the problems, hope to help you, make you better use of silicone oil defoamer.