What should I do after silicone sticking?

The best way is to use a release agent. After using the release agent, this phenomenon can be solved. There are many materials that can be used as release agents, such as silicone oil, detergent water, paraffin, petrolatum, oily spray-type release agents, etc.!

Special attention needs to be paid here. The release agent for different adhesives is different. The range of release agents for organic tin curing systems is much wider! The above mentioned can basically be used, but the best release effect is petroleum jelly and oily spray release agent! If the silica gel you use is a platinum curing system, you must pay special attention to it. Most of the release agents mentioned above cannot be used. Vaseline can be used, and it is a medical environmentally friendly Vaseline. Release agent!

This article mainly outlines why the silicone mold sticking phenomenon occurs, and how to solve it after changing the mold sticking phenomenon!