1. Room temperature curing: curing temperature range is 20-30 ℃

2. Medium temperature curing: The curing temperature range is 32.2-98.9 ℃

3. Gel: Semi solid system composed of aggregate network in liquid retention time.

4. Applicable period: also known as usable time or service life. The usable time or applicable period refers to the time from the mixing of components A and B until the system viscosity rises to the maximum point where it cannot be used. The general applicability period varies with the type and amount of curing agent added, as well as the ambient temperature.

5. Thermal conductivity: Thermal conductivity refers to the amount of heat transferred through an area of 1 square meter under stable heat transfer conditions, with a temperature difference of 1 degree (K, ° C) on both sides of a 1m thick material, in watts per meter per degree (W/m · K, where K can be replaced by ° C) within 1 hour.

6. Cone penetration: Cone penetration is an indicator of consistency and softness, which refers to the depth at which the cone falls into the specimen under specified load, time, and temperature conditions. Its unit is expressed in 0.1mm. The larger the cone penetration value, the softer the lubricating grease, and vice versa, the harder it is.

7. Transmittance: Refers to the efficiency of light transmission through display devices, which directly affects the visual effect of touch screens. Refers to the percentage of light flux passing through a transparent or semi transparent body relative to its incident light flux. Luminous flux is the amount of light energy that reaches, leaves, or passes through a surface per unit time. 

About High transparency liquid silicone rubber,please check the details: Highly-transparent and high strength IOTA 26 series liquid silicone rubber