Room temperature curing epoxy adhesive is a kind of adhesive with a series of advantages such as time saving, labor saving, labor saving, energy saving, easy to use, etc. It is applied to all walks of......
2019-12-04Cement-based penetrating crystalline waterproof coating Cement-based infiltration crystalline waterproof coating is a new type of rigid waterproof material based on cement, sand, etc., and mixed wi......
2019-12-04Product introduction —— Non-curing rubber asphalt waterproof coating is a plastic paste made of rubber powder, modified asphalt and special additives. It has a long-term non-curing waterproof material......
2019-12-04Product introduction —— Spraying fast-setting polymer rubber asphalt waterproof coating is a water-emulsion spray coating composed of rubber modified asphalt emulsion and coagulant. It is sprayed by s......
2019-12-04product description: Silicone nano-permeable waterproofing agent TG-0122 is a nano-material waterproofing agent, non-fluorine-free, non-toxic, odorless, non-combustible, non-explosive, non-volatile......
2019-12-03product description Nano organic silicon waterproof agent is a new type of nano waterproof material. Compared with traditional organic silicon, it can be sprayed, painted, and brushed directly on c......
2019-12-03Precautions 1. Store this product in a sealed and closed light. After each use, the packaging should be sealed to avoid failure, and it should be used up within 72 hours after opening. 2. Before......
2019-12-031. Clean the surface to be treated before use, and remove the base area water, dust and other attachments to be treated. For maximum penetration into the substrate, apply it on a dry surface. 2. Be......
2019-12-03There are seven types: brush (using a brush), coating (using a sponge), rubbing (using a cloth), spraying (using a low-pressure spray gun), soaking (using a soaking tank), roller coating (using a roll......
2019-12-03What is hydrophobic Hydrophobicity is the manifestation of the hydrophobic effect on the surface of the material. The following figure shows the force of a liquid on a solid su......
2019-12-03The basal surface treated by the penetrating waterproofing agent can form an excellent hydrophobic layer. When the rain water hits the surface, the water drops roll down, and it has the effect of lotu......
2019-12-03Silicone waterproofing agent is a new type of highly efficient waterproof material with no pollution and no irritation, and is widely used in advanced countries in the world. After spraying (or brushi......
2019-12-03The liquid sealant is a new type of polymer static sealing material which is fluid. It has good fluidity and can fill the gap in the narrow joint of the metal joint to form a uniform adhesive, viscoel......
2019-12-02LSR liquid silicone is injection molded liquid silicone rubber (LSR): the full name is injection molding liquid silicone rubber, and the vulcanization equipment is injection molding machine. The inje......
2019-12-02According to different molding processes, silicone products can be molded into silicone products, extruded silicone products, liquid silicone products, and special silicone products. These......
2019-12-02