IOTA CORPORATION LTD
2. If the viscosity of the ink is too high, it will cause the ink to be difficult to transfer from the steel plate to the adhesive head. At this time, please add a solvent. During printing, the ink in......
2025-02-18With its unique low viscosity and flowability, this silicone rubber can easily penetrate into every corner of electronic components, achieving seamless potting and building a solid protective barrier ......
2025-02-17With the vigorous development of the new energy vehicle industry and the continuous improvement of battery safety performance requirements, electronic foaming potting silicone rubber, as a high-perfor......
2025-02-17Electronic foamed potting silicone rubber has excellent flow and permeability, and can easily fill the tiny voids inside electronic devices for seamless potting. This not only improves the integrity a......
2025-02-17Compared to traditional potting materials, electronic foam potting silicone rubber has lower volatile organic compound (VOC) emissions and better recyclability. This means that in the production and u......
2025-02-17Thermally conductive silicone, in its various forms, such as gaskets, potting compounds or flake products, can flexibly respond to various heat dissipation needs. It not only adheres closely to the ir......
2025-02-17According to different application needs and usage methods, thermal conductive silica gel is mainly divided into various types such as thermal grease, thermal conductive silicone pad, thermal conducti......
2025-02-17Thermal conductive silicone is mainly used to fill the gaps in the contact surface and extrude the air on the contact surface to achieve better face-to-face contact, thereby reducing contact thermal r......
2025-02-17In the use of products in the silicone rubber industry, there are different material matching for different fields and industries, among which the raw materials of vapor phase adhesive account for the......
2025-02-16Silica gel is a highly active adsorption material, which is an amorphous substance, which contains polysiloxane, silicone oil, silica (silica), coupling agent and filler, etc., the main component is s......
2025-02-16Silicone rubber material is an excellent insulating rubber material, which has the characteristics of ozone resistance and high temperature resistance. But the biggest disadvantage of this material is......
2025-02-16The application technology of silicones in coatings, including inks, has evolved from specialized, high-performance coatings to a wider range of fields. The application of silicone technology can impr......
2025-02-161. Curing performance of silicone building sealant Two-component sealants are carried out by a chemical reaction between components A and B. Components A and B are stable when stored separatel......
2025-02-16Silicone rubber has good low temperature resistance and can still work at -55°C. After the introduction of phenyl group, it can reach -73 °C. Silicone rubber also has outstanding heat resistance, it c......
2025-02-15(1) Select the bottom opening as the positioning part, turn over and pour gypsum into the cavity, its height is about 30mm higher than the bottom, and dig out the pit for future positioning. (3) Gy......
2025-02-15
