Liquid silica gel is a kind of liquid silica gel. It is a solid-to-liquid liquid silica gel machine. It has many types. It is divided into single-component liquid silica gel and multi-component liquid silica gel according to the number of components. Cured liquid silica gel and high temperature cured liquid silica gel. This article will introduce the use of various liquid silica gel.
One-component liquid silica gel: One-component liquid silica gel is composed of only one component of liquid silica gel. The price of liquid silica gel machine is mostly used as a silicone adhesive. The simplest one-component silicone is the toothpaste tube packaging. This type of packaging silicone can be directly extruded and used. The most commonly used is a rigid-wrapped plastic tube like glass glue. This package requires a glue gun or a dispenser. Special attention should be paid to the one-component silica gel also divided into heat curing type and room temperature curing type, as long as the room temperature curing type silica gel has a certain humidity above 10 degrees, it can react. The heat curing type can only react at high temperature. The curing temperature of different heat curing type silica gels is different. Consult the silica gel manufacturer before use.

Main introduction of solid to liquid silicone feeder

I. Machine composition:

1. Liquid silicone injection molding machine: PS200-2A-2B-BMQ (computer + encoder, box type)

(Our factory patent technology, patent number: ZL 2015 1 0476556.2)

2Servo tinting machine

3. Mixer: premix + static mixer

4, glue hose + automatic control nozzle

5, 25 station quantitative injection head

Structural characteristics

1.Using a dedicated mold base for computer keys, which effectively improves production efficiency and saves raw materials;

2.The button mold design is evacuated to ensure that the product is not out of material;

3.The oil circuit system and electric control system of the machine structure are specially designed to make the mechanical action complete quickly;

4.The left and right molds independently control the injection system to facilitate the adjustment of the button load during production;

5. Suitable for mass rapid production.

6. It can form large dose products at one time.

7, instead of the artificial rubber training, molding and other operations.

Performance parameters

1.Injection volume setting

Using our factory's patented technology, the two sets of metering cylinders take turns to inject continuously. According to different products and different technological requirements, the computer sets the injection volume.

2. The highest output pressure is 600KG / cm2 (corresponding oil pressure is 120KG / cm2).

3. Output pressure and speed setting: P / Q proportional pressure / flow oil pressure system is used. Equipped with 3 levels of injection and 2 levels of pressure holding function, each level of pressure and flow can be set according to process requirements.

When the cold half-mold injection process is used, the output pressure and speed can be set in sections, as in the injection molding machine process; when the glue-dispensing process is used, only one injection is required.