Mold silicone rubber is a commonly used material, widely used in the production of various types of molds. However, if not used correctly, it may affect the service life of the mold and the quality of the mold products. So, how to use mold silicone rubber correctly?

Firstly, pay attention to the storage of silicone rubber in the mold. Mold silicone rubber should be stored in a cool and dry place, avoiding direct sunlight and high temperature environments. At the same time, it is also necessary to avoid contact with other chemicals during storage to avoid affecting the silicone rubber of the mold.

Secondly, the correct proportion of silicone rubber should be used. When using silicone rubber, it is necessary to mix according to the specified proportion, otherwise it will affect the performance of silicone rubber. Usually, the ratio of silicone rubber is 2:100:2 for hardness agent: basic rubber: curing agent, and the specific ratio can be adjusted as needed.

Thirdly, operate the production process of silicone rubber correctly. In the production process of silicone rubber, attention should be paid to the steps of material stirring, exhaust, and curing. If operated improperly, it can affect the performance of silicone rubber and the quality of the mold. Therefore, when operating silicone rubber, it is necessary to follow the production process requirements.

Finally, maintain and maintain the mold silicone rubber correctly. During the use of silicone rubber molds, it is necessary to pay attention to the cleanliness and maintenance of the molds. When cleaning, neutral cleaning agents should be used to avoid using cleaning agents containing acids and alkalis. At the same time, after use, the mold silicone rubber should also be stored in a suitable environment to extend its service life.

In short, the correct use of mold silicone rubber can not only ensure the service life of the mold and the quality of the product, but also reduce material waste and resource consumption. Therefore, we should carefully study and master the skills and methods of using silicone rubber molds.