Phosphorus flame retardant Phosphorus flame retardant system includes inorganic phosphorus flame retardant and organic phosphorus flame retardant. Phosphate and phosphonate are the most widely used......
2021-07-12In the application of rubber without reinforcement of silicone rubber, its strength is generally only 03MPa, almost can not be used. In order to reach the level of practical application, it must be fi......
2021-07-12Causes of bubbles: 1, rubber mixing is not uniform, the operator is not standard. In accordance with the reasonable feeding sequence and the number of thin pass as well as the back pressure process......
2021-07-09Silicone rubber is a linear polymer material. The main chain is composed of silicon and oxygen bonds with strong bond energy. It has the advantages of excellent light resistance, aging resistance, die......
2021-07-09Silicone rubber has excellent high and low temperature resistance, ozone resistance, oxygen resistance, light resistance and weathering resistance, excellent electrical insulation performance, special......
2021-07-08Silicone rubber has a unique comprehensive performance, especially the biocompatibility of silicone rubber is a key characteristic, it has been successfully used in other rubber with ineffective occas......
2021-07-08Sulfide Silicone rubber vulcanization process is not completed at a time, but divided into two stages, rubber material under pressure (such as molding vulcanization, vulcanization tank direct steam......
2021-07-07Calender The calender generally adopts the vertical three roll calender. When used for film production, the middle roller is fixed, and the speed ratio of the middle roller is (1.1 ~ 1.4) ∶1 faster......
2021-07-07processing Silicone rubber can be processed by ordinary rubber processing equipment, but it should be noted that: (1) keep the processing process clean, can not be mixed with other rubber, oil ......
2021-07-06Reinforcement agent and related mechanism The strength of silicone rubber vulcanized rubber without reinforcement is very low, only about 0.3Mpa, and has no actual use value. Adding appropriate rei......
2021-07-061. Cooperate with Hot vulcanized silicone rubber compound mainly includes reinforcing agent, vulcanizing agent and some special additives, generally only need to have 5 ~ 6 components can constitute ......
2021-07-05Introduction to silicone rubber Silicone rubber refers to the main chain consists of silicon and oxygen atoms alternately, silicon atoms are usually connected with two organic groups of rubber. Silic......
2021-07-05Characteristics and Application of HTV Silicone Rubber Mixer (2) (1) silicone rubber has thermal conductivity. The thermal conductivity of silicone is larger than that of general organic rubber. ......
2021-07-02HTV structure control agent Structuration definition: after silica silica is added to silicon rubber, the rubber becomes hard in the storage process, its plasticity decreases, and it gradually......
2021-07-02LIMS is a new era of molding system. Advantages of LIMS: 1. Automatic molding, cold runner, no overflow type, automatic demoulding; 2. Short cycle time and less processing procedures, fast cur......
2021-07-01