Language:
[简体中文]

 18255207206

 info@rtvsilicone.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amanda lin
    Phone:18255207206
    FAX:0086-552-3822922
    Mobile:15556181299
    WebSite:www.rtvsilicone.net
    shiwenjiao.rtvsilicone.net
    Email:info@rtvsilicone.net
    QQ:309136222

  • IOTA7500C2 Silicone sealant for lamps

    IOTA7500C2 Silicone sealant for lamps


    Description:

    Silicone sealant for IOTA7500C2 lamps is a silicone sealant specially designed for bonding and sealing between glass, aluminum alloy and plastic on various lamps. It has good adhesiveness, fast curing speed, high tensile strength and small volatile content. Also suitable for general sealing and electrical insulation.


    Features:

    1. Very low volatility, making the lamp difficult to fog;

    2, neutral curing, non-corrosive to most materials;

    3, no primer for a variety of substrates;

    4, excellent heat resistance and cold resistance; continuous operation from -55 ° C to 200 ° C;

    5, excellent weather resistance, ozone resistance and chemical resistance;

    6, excellent electrical insulation;

    7, single component, easy to operate.


    Technical indicators:

    NO.

    project

    Technical indicators

    1

    appearance

    Micro-flowing, white/black/grey

    2

    Extrusion rateml/min

    80

    3

    Dry timemin

    15

    4

    Sag

    Vertical placementmm

    3

    Horizontal placement

    Not deformed

    5

    Hardness, Shore A

    30~60

    6

    Tensile StrengthMPa

    1.2

    7

    Elongation at break%

    260

    8

    Peel strengthN/mm

    8

    9

    Volume resistanceΩ·cm

    1.0×1014

    10

    Dielectric strengthkV/mm

    18


    Uses:

    1. Used for bonding, sealing and strengthening of various street lamps;

    2. Used for general lighting industry sealing and bonding;

    3, used in a variety of different assembly line.


    Operation and safety:

     Thoroughly clean the surface of the substrate with a suitable solvent such as alcohol, xylene, methyl ethyl ketone, etc.; always keep good ventilation in the workplace; uncured sealant should not be in contact with the eyes, if inadvertently contact, rinse with water and contact your doctor; Please avoid prolonged contact with the skin, otherwise it may cause itching. Keep out of reach of children. Colors and packaging Colors are white, black and grey. Special colours can also be produced according to customer requirements. They are available in 100 ml aluminium tubes, 300 ml plastic tubes and 2.6 litre plastic drums. Storage and expiration date Non-dangerous goods, please store in a cool and dry place below 27 °C, valid for 12 months. Operational Safety Information This product data sheet does not contain product safety information for safe use instructions. For safety in use, please read the instructions on the product and safety instructions and on the packaging of the container carefully before handling. Product and Material Safety Data Sheets can be obtained from your local agent


    Construction method:

    1, determine the substrate

    First remove undetermined factors such as certain metal coatings and lacquer layers.

    2, cleaning the substrate

    Remove loose layers that require sizing. If there is a coating or lacquer, make sure there is sufficient adhesion. Use a special cleaning agent to clean the area to be glued, making it clean, hard, dry, free of grease and surface dirt such as mold release agent, curing film and hydrophobic agent.

     



Feedback to "IOTA CORPORATION LTD."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    IOTA welcome your message...

New Products

Copyright © 2000-2019 IOTA CORPORTION LTD., All Rights Reserved