Language:
[简体中文]

 0086-552-3827158

 sales02@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amanda lin
    Phone:0086-552-3827158
    FAX:0086-552-3822922
    Mobile:15556181299
    WebSite:www.rtvsilicone.net
    shiwenjiao.rtvsilicone.net
    Email:sales02@siliconeoil.net
    QQ:309136222

  • IOTA 992 Silicone Structural Glazing Sealant

    IOTA 992 Silicone Structural Glazing Sealant
    1. Structural sealing and glazing for curtain wall
    2. Two components;  


    Features:
    1. non-corrosive to metals, coated glass, low-E glass and many other substrates

    2. Two parts , neutral cure to form an extremely tough elastomeric rubber ensuring a durable, flexible, and watertight bond 

    3. Excellent stability through wide temperature range from –50 ℃ to +150 ℃

    4. Excellent weatherability and high resistance to UV radiation ,heat and humidity, and ozone

    5. High level of mechanical properties

    6. Excellent unprimed adhesion to wide range of substrates

    7. Good compatibility with other neutral silicone sealants


    SPECIFICATIONS

    IOTA 992 is designed to meet or even exceed the requirements of Chinese national specification GB16776-2005 Silicone Sealant for Structural Glazing Complies with ASTM C 1184

     

    Typical properties:

    These values are not intended for use in preparing specifications  

    Test Method

    Property

    Unit

    Standard

    Result  

    GB/T 13477 (ISO 7390)

    Slump

    mm

    ≤3

    0

    GB/T 13477 (ASTM D 2377)

    Tack free time

    h

    ≤3

    0.8

    GB/T 13477

    Working time (after 20 min.)

     

    ≤10

    2.2

    GB/T 531.1 (ISO 7619)

    53113477

    Hardness

    Shore A

    2060

    43

    GB 16776 (ASTM C 792)

    Heat Aging

     

     

     

    weight loss

    %

    ≤10

    3.5

    cracking

     

    Nil

    Nil

    chalking

     

    Nil

    Nil

    GB/T 13477 (ISO 8339)

    Tensile strength

    MPa

     

     

    23℃

     

    ≥0.60

    1.13

    90℃

     

    ≥0.45

    1.02

    -30℃

     

    ≥0.45

    1.62

    water immersion

     

    ≥0.45

    1.01

    water-UV exposure

     

    ≥0.45

    1.09

    adhesion failure

    %

    ≤5.00

    0

    extension rate at ultimate tensile strength at 23℃

    %

    ≥100

    140

    *GB: Chinese National Standard
    ISO: International Standardization Organization
    The “GB” testing method is equivalent or partly equivalent to that in the “()”
    ASTM: American Society for Testing and Materials


    COLOURS

    Part A (base) of IOTA 992 is available in white, part B (curing agent) in black; Black color after mixing.


    PACKAGING

    IOTA 992 is available in kit: part A in 200L drums (net 190L), part B in 20L pails (net 18.5L). 



    STORAGE AND SHELF LIFE

    IOTA 992 should be stored at or below 27℃ in original unopened containers. It has a shelf life of 12 months from the date of manufacture.

     

    LIMITATIONS

    IOTA 992 should not be applied:

    To the materials that bleed oils, plasticizers or solvents, such as impregnated wood, oil-based caulks

    To frost laden or damp surfaces 

    For continuous water immersion

    When surface temperature below 4℃ or over 50℃  

     

    HOW TO USE

    Surface Preparation

    Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

     

    Mixing and Dispensing

    To obtain the optimal performance of IOTA 992, it is recommended that base and curing agent thoroughly mixed using an airless two-part silicone dispensing machine.

     

    IOTA 992 should be mixed at a ratio of 9:1~11:1 base to curing agent by volume; or 11:1~13:1 base to curing agent by weight.

     

    Lot matching of IOTA 992 base to curing agent is not required. Before use, it is recommended that curing agent be fully stirred to ensure the homogeneity of all components.

    992 part B curing agent will react with atmospheric moisture, therefore should not be exposed to air for prolonged periods of time.

     

    Equipment Cleaning

    When not being used, it is recommended that the dispensing equipment be purged either with the base component or flush with suitable solvent.


    Priming

    Priming is not usually required when using IOTA 992. But it is essential that adhesion is tested prior to use to decide whether to use primer or not. 

     

     




Feedback to "IOTA CORPORATION LTD."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    IOTA welcome your message...

New Products

Copyright © 2000-2019 IOTA CORPORTION LTD., All Rights Reserved