Description: Colorless, odorless, non-toxic, and non volatile liquid. ......
2024-02-28Traditional liquid silicone rubber has poor wettability to various substrates and lacks reactive groups, resulting in weak molecular forces and poor adhesion performance. Especially in humid external ......
2024-02-27In terms of baby and child products, it is necessary to consider both the safety and non toxicity of the material, as well as the child's interests and characteristics. Silicone rubber is safe and env......
2024-02-27Additive liquid silicone rubber does not produce by-products, has a very small shrinkage rate, can solidify deeply, and is non corrosive to materials in contact during the cross-linking and vulcanizat......
2024-02-26Condensed single component liquid silicone rubber is made by mixing hydroxyl terminated polydimethylsiloxane (viscosity 3000-10000 mPa. s) as a base polymer (commonly known as base rubber) with crossl......
2024-02-26Material traceability The current energy crisis and climate degradation stem from the depletion of fossil fuels and the burning and disposal of carbon based materials. The source of organic silicon i......
2024-02-23Organic silicon leather is a game-changer in the leather industry. This new environmentally friendly leather is made from organic silicon and processed with solvent-free technology, resulting in ultra......
2024-02-23Silicone rubber has many excellent properties: breathability: Silicone rubber film has better breathability than ordinary rubber and plastic waxing film. Another characteristic is its strong selectivi......
2024-02-22All silicone products are made from raw materials that are subjected to high temperature and high pressure in a mold, and then subjected to vulcanization and oil pressure to produce silicone products.......
2024-02-22Parting line Determining the position of the parting line is one of the first few steps in designing a silicone rubber injection mold. The exhaust is mainly achieved through grooves located on the pa......
2024-02-21The structure of the injection mold for thermosetting liquid silicone rubber (LSR) is generally similar to that of the mold used for thermoplastic materials, but there are also many significant differ......
2024-02-21The main reason for the appearance of white bubbles in the product, which are either empty or foam when dissected, is the presence of air in the silicone material. During the high-temperature and high......
2024-02-201. Oil resistance, solvent resistance, and chemical resistance Compared with methyl vinyl silicone rubber, fluorosilicone rubber has excellent oil resistance, solvent resistance, and chemical resista......
2024-02-20In recent years, the liquid rubber injection molding method has been widely popularized and promoted. This method has become a widely concerned molding method in the industry due to its advantages of ......
2024-02-19Silicone has two physical states: one is a flowing liquid and the other is a solid. The silicone that flows like water in visual appearance is called liquid silicone rubber; Of course, liquid silicone......
2024-02-19