Language:
[简体中文]

 0086-552-3827158

 sales02@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amanda lin
    Phone:0086-552-3827158
    FAX:0086-552-3822922
    Mobile:15556181299
    WebSite:www.rtvsilicone.net
    shiwenjiao.rtvsilicone.net
    Email:sales02@siliconeoil.net
    QQ:309136222

  • IOTA 995 Silicone Sealant For Total Vision System

    IOTA 995 Silicone Sealant For Total Vision System

    1. Outstanding weatherability

    2. One part, fast cure

    3. Good compatibility with other neutral silicone sealants

    4. Excellent resistance to temperature extremes, virtually unaffected performance from –50 ℃ to +150 ℃


    PACKAGING

    IOTA 995 is available in cartridges (net 300ml).

     

    SPECIFICATIONS

    IOTA 995 complies with ASTM C 1184-05.

     

    COLOURS

    ITOA 995 is available in translucent.



    Typical properties

    These values are not intended for use in preparing specifications

    Test Method

    Property

    Unit

    Standard

    Result  

    ASTM C 639

    Slump

    mm

    ≤4.8

    0

    ASTM C 603

    Extrusion rate

    s

    ≤10

    1.9

    ASTM C 679

    Tack free time

    h

    ≤3

    0.4

    ASTM C 661 66153113477

    Hardness

    Shore A

    2060

    32

    ASTM C 1135

    Tensile strength

    MPa

    ≥0.345

    0.45

    ASTM C 792

    Heat aging 

     

    Qualified

     

     

    cracking

     

    Nil

    Nil

     *ASTM: American Society for Testing and Materials

     

    STORAGE AND SHELF LIFE

    IOTA 995 should be stored at or below 27℃ in original unopened containers.
    It has a shelf life of 12 months from the date of manufacture.

     

    LIMITATIONS

    IOTA 995 should not be applied:

    To 4-sided and 2-sided curtain walls;
    In totally confined spaces as sealant requires atmospheric moisture for cure;

    To the materials that bleed oils, plasticizers or solvents, such as impregnated wood, oil-based

    Caulks;

    To frost laden or damp surfaces;

    For metal coated glass glazing.

    When surface temperature below 4℃ or over 50℃;
    For continuous water immersion;


    HOW TO USE

    Surface Preparation

    Clean all joints removing all foreign matter and contaminants such as oil, grease,water, frost, dust,surface dirt, old sealants, or glazing compounds and protective coatings.

     

    Application Method

    Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required for non-porous surfaces, but may be necessary for optimal seal performance of certain porous surfaces. So adhesion testing is always recommended.

    Apply IOTA 995 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled. 



Feedback to "IOTA CORPORATION LTD."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    IOTA welcome your message...

New Products

Copyright © 2000-2019 IOTA CORPORTION LTD., All Rights Reserved